This package gives you the most versatility during the ice season when you are looking at any rattle reel setup below the floor while optimizing your floor space with our true flush mounted sleeve and cover. Under Cover Guide also provides a solution for those holes that are placed in tight areas or too far away from the wall for your rattle reel arms.
The following items are included in the package
- 2 Black Sven’s Sleeves and 2 Clear Covers (Note – Fish Hole Buddy Accessory Clips are not included in package.)
- 2 Under Cover Guide Rattle Reel Brackets – Universally fits almost all rattle reels available or Line Alarm.
- List your color preference in the comments section of the order. We have 1 Red and 4 Blue Left in stock
- Note for Northern Lights Rattle Reels you will need to purchase the Northern Light Install Kit and power code (not available on our website).
- Rattle Reels are NOT Included in this package.
Note you will need to drill holes in the side of your sleeve to install the Under Cover Guide on our sleeve. We will provide you with instructions on how to properly drill this hole.
Our products are proudly made locally and in the U.S.A.
If you have Fish Hole Buddy Floor Rings/Permanent Covers (T-Handle), you will need to also purchase our Fish Hole Buddy Accessory Clips. Clips are sold in sets of 4, with one set recommended for each sleeve/insert.
Fish Hole Buddy Clips – $3.99
These are most commonly found in Ice Castles.
About Sven’s Sleeve
The Sven’s Sleeve Wheelhouse Model works universally with Catch Cover and Fish Hole Buddy, and includes one clear cover. No more worrying about buying the wrong sleeve and/or covers for your wheelhouse again. Note, if you have Fish Hole Buddy Floor Rings and Covers, you will need our accessory clips for your sleeve to fit properly in the floor ring.
The sleeve and cover system is patent pending and features the only true flush mounted sleeve and cover system in the market. This feature eliminates the tripping hazards and the potential for covers to slip out of the sleeves since the cover is flush with the top of the sleeve and is supported on the sides and bottom of the cover by the sleeve. The cover includes a line slot for your fishing line and three additional ports where you can insert the cables for your fishing electronics. These features reduce the chance of tangling since you don’t have to share it with your fishing line slot. The cover is also more durable and thicker than any cover currently in the market.
The sleeve is made of high density plastic and the cover out of Lexan. The sleeve and the cover are produced using an injection molding process which eliminates the chance of there being any sharp edges that may cut or fray your fishing line. Sleeve is 9″ tall and can be cut to preferred length.
About Under Cover Gide
Under Cover Guide was created to allow people with kids, pets or friends to free up some much needed space in their wheelhouse or skid house. This universal rattle wheel and fish alarm mount is easy to install and gives you the ability to keep the line centered in the hole, which can also reduce risking it being frozen in. While using the guide, you can rotate the UnderCover Guide completely out of the hole to land your fish. After you’re done handling your fish, you can tilt the guide in the upright position to re-bait your hook and set your line. When you’re ready to drop everything below deck again, you just simply pull the metal pin towards the center of the hole to drop the guide back down to catch more fish. Use the added rubber hook protector when you are ready to store the UnderCover guide after fishing.